DLSL=DATA0, IPGOFF=IPGOFF_0, BREN=BREN_0, TSCD=TSCD_0, BWEN=BWEN_0, CIHB=CIHB_0, DLA=DLA_0, PEROFF=PEROFF_0, CDIHB=CDIHB_0, RTR=RTR_0, SDOFF=SDOFF_0, WTA=WTA_0, SDSTB=SDSTB_0, CINST=CINST_0, RTA=RTA_0, HCKOFF=HCKOFF_0
Present State
| CIHB | Command inhibit (CMD) 0 (CIHB_0): Can issue command using only CMD line 1 (CIHB_1): Cannot issue command |
| CDIHB | Command inhibit (DATA) 0 (CDIHB_0): Can issue command that uses the DATA line 1 (CDIHB_1): Cannot issue command that uses the DATA line |
| DLA | Data line active 0 (DLA_0): DATA line inactive 1 (DLA_1): DATA line active |
| SDSTB | SD clock stable 0 (SDSTB_0): Clock is changing frequency and not stable. 1 (SDSTB_1): Clock is stable. |
| IPGOFF | Peripheral clock gated off internally 0 (IPGOFF_0): Peripheral clock is active. 1 (IPGOFF_1): Peripheral clock is gated off. |
| HCKOFF | HCLK gated off internally 0 (HCKOFF_0): HCLK is active. 1 (HCKOFF_1): HCLK is gated off. |
| PEROFF | IPG_PERCLK gated off internally 0 (PEROFF_0): IPG_PERCLK is active. 1 (PEROFF_1): IPG_PERCLK is gated off. |
| SDOFF | SD clock gated off internally 0 (SDOFF_0): SD clock is active. 1 (SDOFF_1): SD clock is gated off. |
| WTA | Write transfer active 0 (WTA_0): No valid data 1 (WTA_1): Transferring data |
| RTA | Read transfer active 0 (RTA_0): No valid data 1 (RTA_1): Transferring data |
| BWEN | Buffer write enable 0 (BWEN_0): Write disable 1 (BWEN_1): Write enable |
| BREN | Buffer read enable 0 (BREN_0): Read disable 1 (BREN_1): Read enable |
| RTR | Re-Tuning Request (only for SD3.0 SDR104 mode and EMMC HS200 mode) 0 (RTR_0): Fixed or well tuned sampling clock 1 (RTR_1): Sampling clock needs re-tuning |
| TSCD | Tape select change done 0 (TSCD_0): Delay cell select change is not finished. 1 (TSCD_1): Delay cell select change is finished. |
| CINST | Card inserted 0 (CINST_0): Power on reset or no card 1 (CINST_1): Card inserted |
| CLSL | CMD line signal level |
| DLSL | DATA[7:0] line signal level 0 (DATA0): Data 0 line signal level 1 (DATA1): Data 1 line signal level 2 (DATA2): Data 2 line signal level 3 (DATA3): Data 3 line signal level 4 (DATA4): Data 4 line signal level 5 (DATA5): Data 5 line signal level 6 (DATA6): Data 6 line signal level 7 (DATA7): Data 7 line signal level |